The Vector Table Leg makes a statement with a visually balanced modern aesthetic. The Vector allows for ample seating with knee room available around the entire perimeter of the table.
Table legs sold idividually, quantity 2 needed for standard table.
This item is MADE-TO-ORDER. Production times vary from 2-4 weeks depending on shop workload. Please check current lead times HERE.
Finish options shown below.
Mounting Plate - 3/16" thick, 5" x your chosen width.
Leveling feet come standard with this design.
14 gauge 2x2 American hot-rolled tube steel.
Shipping cost calculated at checkout.
Handmade in the USA.
Choosing Dimensions
+
HEIGHT
Remember to subtract the thickness of your table top when selecting your leg or base height.
For example, if your tabletop is 2" thick and you are building a 30" tall dining table, you will choose 28" for the height of your table legs or base.
Standard finished heights below, subtract table top thickness to calculate proper leg or base height.
Coffee height
14"-18"
Bench Height
18"-20"
Dining Height
29"-30"
Counter Height
34"-36"
Bar Height
42"-44"
WIDTH
The proper width of your legs or base can vary depending on preference and use. A safe rule of thumb is for the legs to be at least two-thirds of the width of the tabletop
For instance, if your tabletop is 36" wide, the legs should be 24" or wider, depending on aesthetic preference. Please contact us if you need help with sizing to optimize stability and seating room.